16

Nov '26

Obeautycase factory floor in Foshan where makeup bags and cases are produced

How to Vet a Makeup Bag Manufacturer Before You Order

Two suppliers can show the same catalogue page. One runs the line; the other buys from whoever answers the phone. The difference only becomes expensive after the deposit.

All three of the checks below can be made before any money moves: documents you can look up, a process the supplier can name, and a capacity figure that matches your order.

Test one: documents with numbers you can look up

“A certified factory” means nothing. A report number means something.

Ask for the actual documents, then check three things in each: the report number, the lab, and whether the test scope covers your configuration.

Here is what a real one looks like. On a vanity case in our range, the EMC testing was carried out by CTI (Centre Testing International) in Shenzhen, an ISO/IEC 17025-accredited lab. The report is EED32S809314, tested against EN IEC 55015:2019+A11:2020 and EN IEC 61547:2023. The RoHS verification is a separate document, report A2260385513101, dated July 2026. A CE Verification of Conformity sits alongside them.

Three details in that paragraph matter:

  • the lab is named and accredited, so the report can be verified independently
  • the report number and date are specific, not “available on request”
  • the scope is stated: which models, which electrical configuration

If a supplier sends a screenshot of a certificate with the report number cropped out, that is not documentation. Ask again.

For products sold into the EU, CE and RoHS are separate requirements — EMC testing covers electromagnetic safety, RoHS covers restricted substances in the materials. One document does not prove the other.

Test two: a process the supplier can name

Every factory says it checks quality. The useful question is what happens at each stage, and in what order.

A normal OEM flow has three gates:

Sample approval. The buyer approves appearance, structure, function and finish against a written specification before production starts. If the supplier cannot describe what the sample record contains — dimensions, materials, colour reference, logo position — there is no reference to inspect against later.
In-process checks. Pieces are checked while they are being made, not only at the end. Ask how many checks and at which stations. A supplier who answers “final inspection only” is telling you that defects are found after the whole batch exists.
Pre-shipment inspection. This is where the batch is compared to the approved sample: quantity, dimensions, functions, workmanship, packaging and shipping marks, before the balance payment releases the goods.

Two follow-up questions separate a real process from a slide:Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

  • Who performs the inspection? Internal QC, the buyer’s own team, or an appointed third party. All three are legitimate; a supplier who resists third-party inspection is not.
  • What is recorded when something fails? The answer should be a classification (functional, workmanship, packaging, documentation) and a documented action — sorting, replacement, repair, re-inspection — not a promise.
  • Is the acceptance standard written down? An AQL plan, or a project-specific defect list, should be agreed before production starts rather than negotiated after a failure.

We publish our inspection points for rolling cases in full, because a checklist the buyer can read is worth more than an assurance.

Test three: capacity that matches your order

Capacity claims are easy to inflate and easy to check against the range itself.

Ask what the supplier actually produces, in what formats, and at what minimum. If the answer is “anything you need”, ask for three current products with dimensions and materials. A published product range by category is a faster answer than a claim.

For reference, our own numbers: 26 years of production, with manufacturing in Foshan and sales offices in Guangzhou, and a range split across soft bags, hard cases, trolley workstations, nail tables and salon chairs. Minimum order is 500 units for makeup bags and most makeup boxes, and 100 units for trolley formats, nail tables, chairs and the smaller handheld boxes. Sampling runs about 15 days; bulk production 25 to 35 days after details are confirmed.

Those numbers are ordinary. That is the point: a supplier who can state them plainly, per product family, is describing a factory. A supplier who quotes one MOQ for everything is describing a price list.

Five red flags

  • Report numbers are never sent, only described. Documentation that cannot be produced on request usually does not exist.
  • MOQ is quoted before the configuration is discussed. It means the number is a sales device, not a production constraint.
  • No sample record, or the record has no dimensions. Whatever is produced cannot be checked against anything.
  • Third-party inspection is discouraged. “Our QC is enough” is the answer of a supplier who expects to be the judge of their own work.
  • Every question is answered in chat but nothing is written down. Specifications that exist only in a message thread disappear when the person leaves.

Packaging and shipping marks belong in that written record too. The export packaging guide shows what a confirmed packing spec should contain, down to carton marks.

The five questions to send

Copy these into an email. The quality of the answers tells you more than any catalogue.

  1. Which accredited lab tested your closest comparable product, and what is the report number?
  2. What does your sample approval record contain, and can I see a blank one?
  3. At which production stages is the product checked, and by whom?
  4. What is the MOQ for my configuration, and what changes it?
  5. Will you accept a third-party inspection before shipment?

If the reply is a brochure, ask again. If it is five short answers with documents attached, you are talking to a factory.

Where this leaves us

This article is written so it works on any supplier, including us.

If you want to apply it here: the test reports, report numbers and CE documentation are published on our quality page rather than claimed in a message; the inspection points are written out; and factory visits and third-party inspections are welcome. Pricing, MOQ and lead time for a specific configuration come back with the quotation, not before it.

The next step after vetting is specifying. If you are at that stage, our guide to what can actually be customized on an OEM makeup bag or case covers layout, materials, hardware, branding and packaging — and the sample approval checklist turns each of those into something you can check on a physical unit.

Share:

Picture of Alex Lee
Alex Lee

Hi, I'm Alex Lee, a senior product specialist and technical consultant at Obeautycase. With over 10 years of hands-on experience in OEM/ODM manufacturing for cosmetic cases, bags, and salon equipment, I know exactly what it takes to bring a design from sketch to production. My goal is to help global beauty brands and wholesalers streamline their supply chains by sharing honest, practical insights on material sourcing, structural engineering, and customization.

Categories

Latest Post

OEM / ODM

26+ years of direct factory expertise. Turn your sketches into premium custom beauty bags and salon equipment with low MOQ and fast turnaround.